Fusion Install for Kress Events Center

Summary

This document details the install process for Fusion for the Kress Events Center.

Body

NOTE: No admin rights are needed to do this procedure.

NOTE: If Fusion does not work after this process, please contact the GBIT Service Desk, and they should verify that the computer is on at least Windows 10 20H2.

Prerequisites

NOTE: This must be done once per computer.

1. Install "Fusion Prerequisites" from Software Center.

Fusion Prequisites

2. Restart computer

Fusion Install

NOTE: This must be done for each user on a computer.

1. Open the Microsoft Edge browser.

Microsoft Edge Icon

2. Do the following:

1. Copy and paste the following URL into the Edge address bar, and then press "Enter": https://uwgreenbayclick.innosoftfusion.com/FusionSetup.aspx

2. Select "Start."

Fusion Program Install

3. Select "Open" on the popup near the top center of the browser window.

Open this file

4. Select "Install" on the Application Install - Security Warning popup.

Select Install

5. Select "More Info" on the Windows Protected Your PC blue popup.

Select More Info

6. Select "Run Anyway" that now appears on the blue popup.

Select Run Anyway

7. After it's installed, a Fusion shortcut will be available on your desktop.

Fusion Desktop Icon

Details

Article ID: 3181

Created

Mon 3/17/25 5:05 PM

Modified

Mon 3/17/25 5:05 PM

Article Visibility

Indicates the minimum user access level required to view this article based on sign-in status.

Note: This setting does not enforce access restrictions. It is used for informational purposes only. 'External (Public)' should be used as the default unless the article is intentionally limited.

External (Public)

Article Summary

The Article Summary field allows you to specify a custom synopsis for use when this article is being displayed in a list and the full body is not being shown. This field is the same as the Article Summary.

This document details the install process for Fusion for the Kress Events Center.